Your Location:  Home > News Center >
  • Factors of refractory alteration in glass pool kiln

    Factors of refractory alteration in glass pool kiln

    During the glass melting process, the refractory material and the glass liquid interact at high temperatures, causing the refractory material to be damaged by erosion and even causing defects in the molten glass. The erosion of the refracto...

    18-07-24
  • Incinerator brick

    Incinerator brick

    Rotary furnace Rotary furnace incineration system is derived from the design of refractory brick lining rotary calcining kiln which has been widely used in the cement industry. The garbage is fed from the front end of the rotating kiln whic...

    18-07-23
  • Refractory bricks can not be used after watering

    Refractory bricks can not be used after watering

    Refractory bricks are classified into acid refractory bricks, neutral refractory bricks and alkaline refractory bricks according to their chemical properties. The acidic and alkaline refractory bricks can be used after being evaporated and...

    18-07-19
  • Introduction to the production process of refractory castables

    Introduction to the production process of refractory castables

    With the wide application of refractory castables, the production method of refractory castables has also received attention. In fact, materials such as refractory ramming materials and refractory spray coatings have the same production pro...

    18-07-17
  • Providing new and good opportunities for the development of the refractory brick industry

    Providing new and good opportunities for the development of the refractory brick industry

    Chinas metallurgical industry will continue to develop steadily, and the growth rate will be slower in terms of quantity and scale, but higher levels are required in terms of improving quality, developing varieties and reducing energy consu...

    18-07-16
  • Refractory brick stacking technology

    Refractory brick stacking technology

    1. Stacked separately according to different parts of the furnace; 2. Stacked separately according to the composition, specifications and dimensions of the refractory bricks; 3. Stacking according to the construction sequence, the refractor...

    18-07-13
  • Pollution and treatment in the production of magnesia refractories

    Pollution and treatment in the production of magnesia refractories

    The pollution sources and pollutants produced in the production of magnesia refractories mainly include: production of dust; kiln discharge of soot, sulfur dioxide, nitrogen oxides, carbon monoxide, etc.; phenolic resin, asphalt, paraffin a...

    18-07-12
  • Refractory properties research

    Refractory properties research

    Thermal properties and electrical conductivity of refractory materials 1.1 Thermal expansion The GB/T7320 standard has two definitions: the coefficient of linear expansion (relative rate of change of sample length between room temperature a...

    18-07-11
  • General requirements for refractory materials for glass kiln

    General requirements for refractory materials for glass kiln

    The general requirements for glass furnace refractories are: 1 Glass enterprise technicians shall conduct a detailed review of the selection, configuration, design, ordering, and masonry construction and maintenance plans for refractory mat...

    18-07-09

Contact Us